Building · 8 min read ·

Energy-Efficient New Homes in Florida: Energy Code & Solar Basics

Every new Florida home has to meet a statewide energy code. Here is what it covers in plain language, plus the basics of adding solar, from permits to net metering.

Every new home in Florida has to meet a statewide energy code. That code shapes the attic insulation, the windows, the ducts and the air conditioner. Many buyers also ask about rooftop solar, which has its own rules on permits, taxes, HOAs and billing. This guide covers both in plain language, so you know what to ask before you build.

What the Florida Energy Code Covers

The Florida Building Code has several volumes. One of them, the Florida Building Code, Energy Conservation, sets minimum energy rules for new buildings.

The current version is the 8th Edition (2023), which took effect on December 31, 2023. The U.S. Department of Energy lists it as the 2021 International Energy Conservation Code (IECC) with state amendments.

The 9th Edition (2026) is scheduled to take effect on December 31, 2026. The Florida Building Commission says it builds on the 8th Edition with changes from the 2024 IECC and other Florida proposals. Which edition applies to your home generally depends on when the permit is submitted, so ask your builder and your building department.

Three ways to comply

The code allows three main paths:

  1. Prescriptive: the home meets set minimums for each part, such as insulation and window ratings, documented on Form R402.
  2. Performance: an energy model compares the proposed home to a reference design.
  3. Energy Rating Index (ERI): the home is scored using a national rating standard.

So two code-compliant homes can use different features. Ask which path your home’s design uses.

Climate Zones in Southwest Florida

The code assigns each Florida county a climate zone, and some requirements change by zone. In the 9th Edition’s county table, Lee and Collier counties are listed in Climate Zone 1A and Charlotte County in Climate Zone 2A. Your building department can confirm the zone that applies to your permit.

Common Efficiency Features Buyers Ask About

Here’s what the 8th Edition prescriptive form lists for common features. Homes using the other paths may use different values.

Attic and wall insulation

For ceilings, the form lists a minimum of R-30 in Climate Zone 1 and R-38 in Climate Zone 2. Wood-frame walls call for at least R-13 in both zones. A higher R-value means more resistance to heat flow.

Windows and SHGC

Windows carry two key ratings, which you can find on the National Fenestration Rating Council (NFRC) label:

  • U-factor: how easily heat flows through the window. Lower is better.
  • Solar Heat Gain Coefficient (SHGC): how much of the sun’s heat passes through the glass, on a scale from 0 to 1. Lower means less heat gain.

The Department of Energy advises buyers in hot climates to choose products with low SHGCs to cut unwanted heat gain. On the 8th Edition prescriptive form, the maximum SHGC for glazed windows and doors is 0.25 in both Florida climate zones. Climate Zone 2 also has a maximum U-factor of 0.40, with a higher allowance (0.65) for impact-rated windows.

Air leakage and the blower door test

New homes must be tested for air leakage with a blower door test. The form calls for leakage of no more than 7 ACH50 (air changes per hour at a test pressure of 50 pascals). The test report must reach the code official before the certificate of occupancy is issued.

A very tight home needs fresh air too. The 8th Edition clarifies that whole-house mechanical ventilation is required when leakage tests below 3 ACH50.

Duct testing

Ducts and air handlers must be installed “substantially leak free,” and a total leakage test is required unless all ducts and the air handler are inside the home’s insulated envelope. On the prescriptive form, the limit is 4 cubic feet per minute per 100 square feet of floor area when the air handler is installed. The same form says air handlers may not be placed in the attic.

Air conditioning and heat pumps (SEER2)

Cooling efficiency is now rated in SEER2. The 8th Edition form lists federal minimums of SEER2 14.3 for central air conditioners under 45,000 Btu/h and for central heat pumps, and SEER2 13.8 for larger central systems.

Size matters as well as efficiency. The code requires an equipment sizing calculation to be performed and attached to the permit documents. The form also calls for a programmable thermostat and high-efficacy lighting in permanently installed fixtures.

What Changes With the 9th Edition (2026)

The Florida Building Commission’s analysis of changes highlights several updates for homes:

  • Extra efficiency credits on the prescriptive path. A new Section R407 requires added credits from options such as improved windows, reflective roofs, more efficient HVAC or water heating, ducts inside conditioned space, renewable energy and demand-response thermostats.
  • Stricter performance path. The modeled home’s loads must now come in at or below 85 percent of the reference design, down from 95 percent, and the duct testing exception for that path is removed.
  • Ventilation testing. Mechanical ventilation systems now need flow-rate testing.
  • Solar-ready details. Where a home includes a solar-ready zone, the construction documents must show the details.

An Energy Rating Notice at Contract

Florida law requires that a buyer of a property with a building be given information about the option of an energy-efficiency rating at or before signing the purchase contract. It also notes that a rating may help a buyer qualify for an energy-efficient mortgage.

Florida Solar Basics

Permits and connecting to the grid

Rooftop solar needs a building permit from your local building department, and your electric utility has its own approval process.

Depending on where you build in Southwest Florida, your provider may be a cooperative like LCEC or an investor-owned utility like FPL. LCEC requires a passed city or county inspection, an interconnection agreement and a bidirectional meter before the system starts operating. FPL says rooftop systems must be approved before installation, and it installs a meter that measures power sent to the grid.

Net metering at a high level

Florida law defines net metering as a billing method that lets customer-owned renewable generation offset the customer’s electricity use on site. Investor-owned utilities follow programs set by the Florida Public Service Commission. Municipal utilities and electric cooperatives must develop their own programs.

How credits work depends on your utility:

  • FPL says excess power is deducted from your monthly bill or carried as a credit to a future bill within the same calendar year.
  • LCEC says unused energy is banked, and reserves left after December billing are paid out in January at the avoided wholesale rate.

Read your utility’s current guidelines before you sign a solar contract.

Property tax treatment

Under section 193.624, Florida Statutes, the value a renewable energy device such as a solar system adds to residential property may not be considered when the property is assessed. For homes, this applies to devices installed on or after January 1, 2013. A separate statute, section 196.182, exempts 80 percent of the assessed value of devices that are tangible personal property. Parts of both are scheduled to expire at the end of 2037. Your county property appraiser can tell you how they apply.

Sales tax exemption

Section 212.08 exempts solar energy systems or any component thereof from Florida sales tax. The Florida Solar Energy Center certifies the list of qualifying equipment to the Department of Revenue.

HOA and deed restriction rules

Under section 163.04, deed restrictions and covenants may not prohibit solar collectors, and an association may not deny an owner permission to install them. An association may decide where on the roof they go, within an orientation to the south or within 45 degrees east or west of due south, as long as that doesn’t impair how well the system works.

Federal tax credit update

The IRS says the federal Residential Clean Energy Credit is not available for property placed in service after December 31, 2025.

Energy and Solar Questions for Your Builder

  • Which code edition and compliance path will my permit use?
  • What climate zone is my lot in?
  • What are the planned insulation R-values and window U-factor and SHGC?
  • Where will the ducts and air handler be located?
  • Who will perform the blower door and duct tests, and will I get the reports?
  • What SEER2 rating and sizing calculation are planned for the HVAC system?
  • Can the roof be laid out for future solar, and is there an HOA solar policy?

Energy codes, tax rules and utility programs change. Confirm details with your building department, utility, county property appraiser or a tax professional.

Talk With Proudhouse Builders

Proudhouse Builders plans, designs and builds homes and communities in Southwest Florida. If you’re planning a new home and want to talk through energy and design questions, start with our services, read our guide to building for hurricanes, call (239) 321-0594, or reach out through our contact page. You bring the land, we do the rest.

Sources

Own land in Southwest Florida?

Our team can tell you what your parcel can become. Call (239) 321-0594 or start a land review online.

Start a land review